We found 7175 price guide item(s) matching your search

A Regency mahogany hat and coat stand, with turned column and brass pegs with iron drip tray raised on paw feet. Height 180 cm, base 36.5 cm square excluding protruding feet. CONDITION REPORT: There are three hat and coat hooks to the top which other than being tarnished are all in good order. The lower tier of hooks has one missing at the rear. The other two are in good order. You will note that there should be a band around the centre of the column which would presumably have attached to a rail that would originally have held sticks in place. The piece is structurally sound and good quality mahogany. There is no woodworm. The metal base is black painted and whilst a little dirty and tarnished is in structurally good order.

Metal hat/coat stand, 192cm (h) / All lots are located at Gower Reclamation, Unit 17b, Crofty Industrial Estate, Gower, Swansea, SA4 3RS. Regretfully Wellers are unable to offer any type of shipping, please see our important information for collections information.

A DECORATIVE METAL HALL STAND WITH COAT HOOKS, STICK STAND SECTION AND A GLASS SHELF

A bentwood coat and hat stand.

An early 20th Century mahogany bentwood coat/hat stand with turned finial above six hooks, and four bentwood legs, 111cms high.

An unusual early 20th Century oak and metal shop display rack/stand or coat rack, with three adjustable mirrors above three sets of hooks, with shelf below, on circular metal base, 51 x 184cms high.

A large English carved and painted Royal Coat of Arms of the United KingdomProbably made by Orton & Spooner, circa 1900The central arms with knight's helmet crest, flanked by a rampant lion and unicorn, above scrolling acanthus leaves, a rose, thistle and shamrock and with the motto 'DIEU ET MON DROT', missing elements, together with a bespoke wrought iron stand on casters, 135cm wide, 20cm deep, 94cm high (53in wide, 7 1/2in deep, 37in high) This lot is subject to the following lot symbols: TPTP For auctions held in Scotland: Lots will be moved to an offsite storage location (Constantine, Constantine House, North Caldeen Road, Coatbridge ML5 4EF, Scotland, UK) and will only be available for collection from this location at the date stated in the catalogue. Please refer to the catalogue for further information.For all other auctions: Lots will be moved to an offsite storage location (Cadogan Tate, Auction House Services, 241 Acton Lane, London NW10 7NP, UK) and will only be available for collection from this location at the date stated in the catalogue. Please note transfer and storage charges will apply to any lots not collected after 14 calendar days from the auction date.For further information on this lot please visit Bonhams.com

HAT & COAT STAND

A Bentwood hat, coat and stick stand

A set of coat hooks, a chopping board, a bread bin, biscuit box and a tray on stand

AN AESTHETIC MOVEMENT FAUX BAMBOO COAT STAND (3)199cm high, a similar folding coat rack, 71cm wide; 35cm high, and a small rectangular mirror, 53cm wide; 45cm highThe coat stand is in good overall condition with no major faults, one support has become loose to the column and will need some attention, the folding coat rack suffers with one slightly loose peg, old marks and scratches present to all three items. 

1960s Mattel Vintage Barbie doll with clothing 1964/5 era ; Boxed bubble cut Barbie doll in box with Red Helanca swimsuit and stand( box label says a ponytail  hair doll so incorrect) and the doll has a green ear mark on her right cheek-see all photographs, from an old earring post-to include Its cold outside brown hat and coat set,Lovely lingerie pieces, Pyjama Party,, stormy weather yellow coat( part set as shown), registered Nurse with hot water bottle  glasses and diploma chart etc; Red flare velvet coat set; Beauty bath set with scales and accessories as shown etc-please see all photographs of what pieces are in each set in detail.  A good collection and owned neatly from vendors childhood ( quantity) You are personally  invited to Bishton Hall for the Viewing day 11-3pm on Sunday 8th September , the day prior to the sale and view and see the dolls toys and teddy bears and fashion and textiles for yourself in person

A MODERN BENTWOOD COAT / HAT STAND, with a revolving top, height 187cm (condition report: overall good condition)

Habitat light oak hat and coat standDimensions: Height: 180cm  Length/Width: 57cm 

Roger Feraud (French, 1890-1964) "Cle de Sol" Coat Stand Circa 1950s, "Atomic" design with turned and lacquered wooden spherical hooks on shaped and black lacquered metal frame to hairpin supports.183cm high, 60cm widePrivate collection, Staffordshire.Overall wear commensurate with age and use but stable and ready to use; some surface scuffs and rubbing to blank finish and hooks, no breaks or repairs.

A modern 2-section painted metal hat and coat stand, with label for Sylvester of Oxford. H190cm.

MID CENTURY TEAK HALL HAT AND COAT STAND, with mirror back185cm high, 62cm wide

MID CENTURY SPUTNIK HAT AND COAT STAND, chrome with black metal base160cm high

A 20th century metal coat stand, 190 x 86 cm

Folding chair, coat stand etc

A 20th century oak mirror backed hall stand with central bevelled glass mirror pane flanked by coat hooks over hinged glove box flanked by umbrella stands, 203cm high x 88cm wide x 28cm deep Condition Report:Available upon request

A brass bound barrel form oak stick stand decorated with a coat of arms circa 1900, 42 x 36 x 61cms. Estimate £60-80.

A mahogany Skeleton hall stand with coat hooks central circular mirror 190cm x 74cm

A METALWARE FREE STANDING CAT AND COAT STAND

A BENTWOOD COAT AND STICK STAND 62" HIGH

A 19th century Venetian carved and painted wood ‘Blackamoor’ figural torchere stand (A/F) 122cm high and a painted oil on board armorial Coat of Arms, 42cm x 39cm.From the private collection of a Cotswolds gentleman

A 20thC oak coat stand, with four metal double hooks to top and four recesses for sticks and umbrellas to base, on four outswept legs, 163cm high.

Vintage metal hat and coat stand measures approx 18 inches tall by 35 wide

An early 20th century Jacobean revival oak hall stand, the carved stepped pediment over rectangular bevelled glass mirror flanked by six turned coat pegs with hinged box, carved with green man masques, flanked by umbrella stands with drip trays, on moulded base with turned front and square back supports, H190, W92, D30cm.

A modern mahogany hat and coat rack of Victorian bed post design on cabriole tripod base 192 cm high together with an Edwardian mahogany and satinwood strung four tier folding cake stand (2)

A Victorian cast iron hall stand in the Aesthetic taste with flower head medallion and fan type decoration set with seven coat/hat hooks and open stick stand with drip tray to base on bracket feet 68.5 cm wide x 20.5 cm deep x 187 cm high CONDITION REPORTS Whilst the piece is basically sound throughout with no signs of any pieces missing, the paintwork is showing signs of rust throughout, particularly to the drip tray and base - see images for further detail.

A collection of furniture to include a modern oak and inlaid small chest of two drawers in the Arts & Crafts manner 65 cm wide x 44 cm deep x 63 cm high together with a cane seated tub chair with metal legs, an Ikea black chair, seven various metal and other occasional tables, a hat and coat stand and a Marks & Spencers table lamp (12) CONDITION REPORTS Please note caned chair with some caning missing to the front rail of the seat and loose caning in several other areas - see images. Chest of drawers basically appears sound with some light marking to the top conducive with usage

Modern coat stand

Riding - equestrian interest - a lady's Spring Tree brown leather saddle, made in Walsall; another adult size leather saddle; a child's brown leather saddle; another child's brown leather saddle; assorted reigns, stirrups, bridles, bits, horse blanket, a mahogany coat stand, qty

A Victorian Coalbrookdale style cast iron hall stand, the back cast with leaves and fruit, with central round mirror, and seven coat hooks, above a base decorated with a hunting dog and game bird, on a bow fronted base, 202cm high. (AF)

COAT STAND, SHOOTING STICKS, COMPANION SET AND WINE RACK

A collection of furniture. Includes wicker shelving unit and coffee table, bamboo style nesting tables, cheval mirror, coal box and a turned wooden coat stand for repair.

A pair of beech and bentwood coat and hat stands - with revolving tops, on tripod bases, 182 cm high, one arm on one stand damaged.

A panelled oak hall bench, the raised back fitted with bevelled mirror and eight coat/hat pegs, 80 x 36 x 180 cm high, with stick stand to left hand side

A 1970s bentwood hat and coat stand with green stained finish with two sets of six coat hooks H x 190cm base W x 43cm 

A mid century teak hall stand with shaped back three bar coat rack with shaped mirror and umbrella stand to side fitted single key drawer and cupboard door on plinth base H x 185cm L x 78cm W 25cm 

Assorted American Presidential related pin badges comprising of For President Wm H,Taft, portrait with black text; Teddy Roosevelt circular badge, portrait in a red and blue frame; Warren G. Harding For President, portrait within blue border and white text; embossed gilt brass medal with portrait of Calvin Coolidge; Hoover, a gilt metal badge with blue enamel gilt text; Franklin F. Roosevelt, central portrait with American style flag; Frank D. Roosevelt 'Okay America Inauguration March 4 1933; You Bet - I'M With You; Roosevelt circular badge, decorated with American flag; reproduction tinplate Harry S. Truman For President, portrait of Truman surrounded by American flag, 38mm diameter; gilt brass circular Harry S Truman medal with central portrait, American coat of arms verso, 30mm verso; Bastian Bros I Like Ike tin plate badge, with blue lettering on white and blue background, 20mm diameter; Peace Progress & Prosperity, I Like Ike, central portrait with blue lettering and white lettering on red banner, 35mm diameter; indistinctly marked Ike and Dick badge, white and blue lettering with red, blue and white banners, 20mm diameter; unnamed blue tin plate badge, with portraits of Carter & Mondale with white lettering, 20mm diameter; unnamed 1980 Carter & Mondale badge, with central panel of two portraits and white lettering, 20mm diameter; unnamed 1980 Carter & Mondale sepia badge, with central brown portraits on off white background, 30mm diameter; unnamed 1980 Carter & Mondale black and white badge, with black lettering and grey portraits, 20mm diameter; unnamed 1980 Jimmy Carter for President, with black lettering and off white background, 24mm diameter; unnamed Jimmy Carter for President, with central portrait and green banner with white lettering, 25mm diameter; N G Slater Corp, Experience Counts, Elect Gerald R. Ford in '76 badge, with central black and white portrait with red and blue banners and white lettering, 85mm diameter; Allied Printing I'm for Nixon tin plate badge, with blue lettering and white, red and blue banners, 20mm diameter; unnamed Richard M Nixon badge, with portrait of Richard M. Nixon with black background, 55mm diameter; unnamed Regan for Governor badge, with black lettering on white and green background, unnamed Re-elect the President, red and blue lettering on white background, 28mm diameter; unnamed Nixon-Agnew badge, with red lettering on black background, 24mm diameter; an unnamed Nixon Agnew, with red and blue semi-circle design and white lettering, 28mm diameter; indistinctly named Kennedy badge, blue lettering on white background, 25mm diameter; two Vote for Seagrams It's America's Whiskey printed tinplate badges, one depicting Peace - Woodrow Wilson & other Coolidge Deeds-Not Words, both with portraits, 50mm diameter; 1980 President Regan, badge with black and white portrait and a red, white and blue ribbon with gilt lettering, 20cm long; unnamed Ronald Wilson Reagan, 40th President, 1911-2004 with portrait, 75mm diameter; Joy Products Re-Elect Regan in '84, central portrait with blue lettering and stars, 62mm diameter; Bold Concepts Win One More for the Gripper, central portrait of Ronald Regan and George W Bush, white lettering on blue background, 75mm diameter; unnamed Re-Elect President George W. Bush, central portrait with white lettering, 75mm diameter; unnamed Carter Special, a Little Peanut Butter, A lot of Baloney, bitten slice of bread on blue background, 55mm diameter; unnamed Reagan, Let's make America great again, white writing on blue background, 30mm diameter; unnamed Ted Kennedy for President in 1980, portrait surrounded by red and blue banners with white writing, 55mm diameter; Joy Products Ronald Reagan George Bush, two 50th American Presidential Inaugural, portraits with black text and white and red banners, 75mm diameter; indistinctly named, Nixon's The One!, white tinplate with red writing, 35mm diameter; N.G Slater of New York, Clinton for President '92, portrait of Bill Clinton by the White House, 75mm diameter; unnamed rectangular Bill Clinton For President, Make It Happen!, 1992, white and red white writing on blue background, 75mm wide; unnamed Carter for Ex President, yellow badge with black lettering, 43mm diameter; indistinctly named Nixon's The One!, white tinplate badge with red lettering, 35mm diameter; unnamed Rock the Vote, black lettering on green background with red tick, 35mm diameter; H. Slater Bill Press badge, white capital letters, on blue background, 55mm diameter; Bold Concepts Ronald Wilson Reagan, white star shaped text with orange lettering on blue starry background, 55mm diameter; unnamed I've Been Screwed By A Peanut Farmer Without A Kiss, red capital letters on white background, 75mm diameter; unnamed Now More Than Ever, circular badge with two portraits waving on blue background, 75mm diameter; unnamed Vote Dole Kemp 1996, Bring Back The Regan Agenda, black and white portrait with blue lettering and red border, 75mm long; two Bold Concepts Happy Trails, Mr. President 1911-2004, blue and white lettering with central portrait, 75mm diameter; R. Worcester of London, Americans in Britain for Kennedy, central portrait flanked by American and British flags, 55mm diameter; unnamed Fritz & Tits in '84, 3 Biggest Boobs in America, two black and white portraits, with red lettering on white background, 75mm diameter; N.G. Slater A New Beginning, President & Vice President Inauguration Day, January 20th 1993, portraits on gold coloured background, with American flags, 85mm diameter; Horn Company Elect Andrew Henshel for Young Democratic Leadership, white and blue lettering on on white and blue background, 63mm diameter; Bold Concepts My Heroes have always been Cowboys, portraits of Ronald Reagan and George W. Bush, coloured portraits with orange lettering, 75mm wide; Put Michigan Back to Work, Regan for President, blue lettering and portrait on white background, 30mm diameter; Bold Concepts Leadership for a Change, Clinton Tsongas, portrait of both with white lettering on red banner, 55mm diameter; unnamed George Bush for President, black lettering on white background with blue and red detail, 35mm diameter; R. Worcester Americans in Britain for Kennedy, portrait surrounded American and British flags, with blue lettering on cream background, 55mm diameter; Re-Elect, The President, white and red lettering, 55mm diameter; unnamed Lyndon B. Johnson For President, white and red lettering on blue and cream background, with central portrait, 42mm diameter; 1984 Re -Elect Ron and George (Regan and Bush) with white lettering on blue and red banners, 42mm diameter; H. Slater West 'One Million New Jobs for California' - Kathleen Brown, white rectangular badge with blue and red lettering and red bear, 75mm wide; N. G Slater Senior Power for the President, red and blue lettering on white background, 40mm diameter; Official Nixon badge, Nixon Agnew, white tin plate badge with red and blue lettering, 35mm diameter; unnamed Wallace for President, Stand Up for American, central blue portrait with blue and red banners on white background, 40mm diameter; Allied Printing Young Democrats for Clinton Gore, white and blue lettering on blue and white banner, 35mm diameter; Reproduction 1984, Progress for All Forward with Kennedy, black portrait with blue and red lettering, 35mm diameter; unnamed See Dick Run Run, Dick, Run, black lettering on white background, 30mm diameter; four Bastian Bros Willkie tin plate circular badges, blue lettering with blue, white and red banners, 20mm diameter; one similar Willkie and McNary badge, Adcraft Nixon's The One, red lettering on white background, 22mm diameter; indistinctly marked Viva Nixon, white badge with red lettering, 20mm diameter; Nixon, red lettering with blue and white background, 20mm diameter; Standard & Evidence gilt brass Woman's Roosevelt Memorial Association gilt metal badge, 15mm diameter.

Ico Parisi for Fratelli Reguitti manner - A mid century circa 1960s teak wood gentleman's valet stand. Having jacket / coat rack to top, into a bar rack for trousers and tripod stand with metamorphic movement for standing. Measures approx. 117cm x 49cm x 25cm. 

Oak hall stand, c1900. Four coat hooks with central mirror. Central glove/key box and stick stand below. W 78cm, D 29cm, H 195cm.

Mahogany coat and umbrella stand 

AN EARLY 20TH CENTURY OAK FREE STANDING COAT/HAT STAND WITH VASE SHAPED FINIAL

A WROUGHT IRON COAT AND STICK STAND

A BENTWOOD COAT AND HAT STAND

This Santa Claus is the perfect Christmas decoration. His gold outfit and white cream and gold coat lapels with intricate beaded and faux fur trims show attention to the smallest detail. He has a golden staff and floral printed gold fabric toy bag loaded with presents. His solid polyresin boots enable him to stand firmly on any flat surface and his hat has a hidden wire to adjust the position. Dimensions: 4.5"L x 9"W x 16"HCondition: Age related wear.

ALBA SEVILLA HAT, COAT AND UMBRELLA STAND

A vintage coat and hat stand

Walnut wall hanging coat stand with bevelled mirrors measures approx 44 inches long by 18 deep

An Italian bamboo coat stand

A painted wrought-metal hat and coat stand. Height 190cm.

A mid-20th century beech bentwood hat and coat stand, in the manner of Gebrüder Thonet, 199cm high, 70cm wide, 38cm deep

A late Victorian/Edwardian walnut novelty combination hall looking glass and hat stand, of equestrian interest, bevelled mirror plate within six coat hooks, 84cm high, 74cm wide, c.1900

HERMAN MILLER - A contemporary Shard hat and coat stand, by Gemma Fabbri. Height 163cm.

A mid-century teak hat and coat stand. Height 177cm.

An antique oak coffer, with carved armorial decoration and two drawers to base. 98x61x55cm.Carved with "Non Quo Sed Quomodo", translates as "not whither but how", the motto of Lord Howard de Waldon of Chester, though the coat of arms does not match.Some damage to top and corners. We suspect it should probably have had a stand originally.

A bentwood coat stand in the manner of Thonet. Height 195cm.