65th International Auction of Quality Antique Woodworking Tools

A 6" pair of German silver proportional dividers by STANLEY London in orig fitted case G++

A set of extending German silver trammel heads by RIEFLER in orig fitted case G++

A comprehensive German silver drawing set by RIEFLER incl. trammel heads and proportional dividers, minor discolouration to some steel points in o...

A German silver drawing set by RIEFLER in orig fitted case G++

A German silver drawing set by RIEFLER in orig fitted case F

A German silver drawing set by RIEFLER in orig fitted case G++

A German silver drawing set by RIEFLER in orig fitted case F

A German silver drawing set and a pair of trammel heads by RIEFLER in orig boxes F

A German silver drawing set and a set of three bows by RIEFLER in orig fitted cases F

An early architects/surveyors etui of brass drawing instruments which appears to be complete and all original incl. ivory sector and scale rule, t...

A engineers 6" adjustable level by RABONE No 1381 with rolling cover in orig box F

A 10" brass topped mahogany sighting level and plumb G+

An 11" ebony level by BUIST Edin'r with decorative brass fittings also with R Browning Glasgow G+

A 9 1/2" rosewood level with fancy brass top by J J LIDDELL Maker Edinburgh G+

A 6" brass topped ebony level by MATHIESON Glasgow No 6C G+

An 8" ebony level with sliding covers in brass top (Jay Gaynor collection) G+

A little used 8" boxwood and brass combination rule, level and plumb by SMALLWOOD and an engineers 7 1/2" brass level G++

A little used 18" brass topped mahogany level by RABONE dated 1918 F

An engineers 8" adjustable level and plumb by RABONE No 1388 in orig box G++

A little used 9 3/4" brass topped ebony level by ONIONS & Co and a 6" brass topped mahogany level by MARPLES F

A 7" brass inclinometer with most orig lacquer G++

A 28" mahogany and brass beam compass by ASTON & MANDER in orig mahogany box (Jay Gaynor collection) F

A SARGENT No 600 take down roofing square in orig canvass cover c/w The Steel Square Applied to Roof Construction by J T Draper 64pp instruction b...

A Cap't Field's Improved 18" ebony parallel rule by HEATH & Co London S.E.9 (chip to one corner) and another unnamed (Jay Gaynor collection) G+

A fine quality 16" mahogany plumb square with brass bob G++

A foundry size engineers steel square by BROWN & SHARPE with 30" arm in orig fitted wood case with trade label G++

A 12" brass faced ebony bevel and a 12" square both by MARPLES G+

Two 17/18c squares and a bevel with brass arms (Jay Gaynor collection) G

A heavy duty inside and outside brass caliper by ELLIOTT Bros London stamped W.D. with broad arrow (Jay Gaynor collection) G++

A probably unused rosewood and brass mortice gauge by MARPLES No 2154T in orig box F

A most unusual 17/18c pair of wooden wing calipers with very early iron plates to support a crack in each arm and knurling to decorative circular ...

An engineers 9" square beautifully engraved L.DEAN 1913 G++

A watchmakers small steel caliper gauge with graduated brass arm by I.M.E. Made in England G+

A RABONE No 321 boat builders 12" mahogany and brass bevel G+

A stonemasons brass square by MILLS BROS Wandsworth Rd stamped 9/16" (Russell collection) G

A nice quality 19c rosewood stocked try square with moulded 7" brass arm (illustrated Russell fig 254) G+

A 12" brass faced ebony mitre square by C F JOHNSON Sheffield G++

An unusual adjustable boxwood bevel with 9" arm and brass screw G++

A fine quality brass faced boxwood slitting gauge F

A little used ebony and brass slitting gauge by MARPLES F

A little used rosewood and brass mortice gauge by TYZACK G++

A most attractive lignum vitae marking gauge F

A little used combination rosewood and brass mortice and marking gauge by SORBY F

A little used rosewood and brass slitting gauge by MOULSON Bros F

A fine and mostly unused half set of 18 H & R's by HIELDS Nottingham Nos 2 to 18 F

A fine and very little used half set of skew mouth H & R's Nos 2 to 18 by COX & LUCKMAN Birmingham F

A little used part set of 17 H & R's by ROUTLEDGE Birmingham Nos 2 to 18, No 8R is missing G++

A little used kit of 15 beech planes all except 3 stamped H A HOBDAY Tool Merchant Chatham, 3 are marked OSBORNE Chatham ( comprising plough and f...

An unused boxwood compassed rebate plane by BILL CARTER 3 1/2" x 1" (illustrated Russell fig 1306) F

A small 6" European hornbeam T & G plane for a 3/32" tongue and groove (illustrated Russell fig 400) one wedge replaced G+

A HART'S Patent chamfer plane by GREENSLADE Bristol 12" x 2" o/a (this plane is featured in the Taths Journal vol 7 G+

A rare HART'S Patent London No 42 chamfer plane (illustrated Russell fig 957 also see TATHS Journal vol 7 pp 32-34) G++

A sliding box type beech chamfer plane by AMES Birm'm 6 1/2" x 2 1/4" G+

A little used radiused birch panel plane by RICHTER & BERLIN Dresden c1880 with full length sole and side fences (see Russell fig 397 for details...

A probably unused beech sliding box type chamfer plane with brass fittings 6" x 2" F

A most unusual coachbuilders beech sharply compassed grooving plane by BUDD London 4 1/2" x 1 1/2" with 1/8" iron and nicker (illustrated Russell ...

A boxwood faced mahogany cill plane 7 1/2" x 2" G

A rare 9 1/2" French complex moulding plane in cormierwood by A TIERSOT Paris unusually with a curved blade moulded throughout it's length with ma...

A very rare KIMBERLEY Patent interchangeable sole bead plane with one boxwood sole (illustrated Russell fig 566) G+

A 9 1/2" boxwood ogee moulding plane (illustrated Russell fig 562) G++