Two Day Sale of Fine Art & Antiques

Three Dinky Toys diecast model vehicles - "Austin Somerset Saloon" (No. 161), "Jaguar XK120 Coupe" (No. 157), and "Telephone Service Van" (No. 261...

Three Dinky Supertoys diecast model vehicles - "Dumper Truck", (No. 562 - some repainting), "Elevator Loader", (No. 964) and "Pullmore Car Transpo...

Six modern Steiff limited edition Rupert Bear and his friends plush dolls, comprising - "Rupert Bear" (No. 513 of 3000), "Edward Trunk" (No. 253 o...

A scratch built painted wood model of a paddle steamer, 43ins long, with ebonised wood stand for same ...[more]

A grey leather covered travelling games case retailed by Fortnum & Mason with fitted interior, containing - roulette, draughts, chess, dominoes an...

A rare pre-war Hardy Bros aluminium competition casting reel, Model No. HM8, in original mahogany fitted box, 3.125ins diameter Note : These comp...

A rare pre-war Hardy Bros aluminium competition casting reel, Model No. XH1, 3.5ins diameter in original fitted box (crack to frame) Note : These ...

A Victorian mahogany rectangular folding bagatelle board with green baize lined interior, 18ins x 72ins x 5ins high (worn and with slight damage -...

A late 19th Century carved and painted Kauri Gum bust of a Maori warrior with headband and flax cloak, 8ins high (damaged) ...[more]

An unusual cow horn drinking vessel, the polished exterior engraved in the "Scrimshaw" manner with the shoulder-length portrait of a gentleman and...

A 19th Century Swiss rectangular gilt brass "Singing Bird" automaton box, the front slide activating an oval lid with pop-up figure of a feathered...

A 19th Century four air miniature musical box with 2.75ins steel comb, contained in burr walnut case, the inside lid with titles of airs in Englis...

A good 19th Century turned satinwood and ivory mounted six keyed flute by Button & Whitaker of St. Pauls Churchyard, London, the whole in four sec...

A late 19th Century French Mirecourt violin with figured two piece back, back measurement excluding button 14.25ins, 23.75ins overall, with label ...

A 19th Century full size violin with figured two piece back, back measuring excluding button 14ins, 23.5ins overall, with label to interior "Anton...

A late 19th Century German or French full size violin with figured two piece back, back measurement excluding button, 14ins - 23.75ins overall, wi...

A 20th Century full size violin with figured two piece back, back measurement excluding button 14.25ins - 23.75ins overall, with bow and wooden ca...

An early 20th Century German violin bow stamped "E.M. Penzel", the round stick of Pernambuco, the ebony frog in "Plain" style without eyes, 29.37i...

A modern Excelsior cello imported by Boosey & Hawkes (back measurement excluding button 30ins - 49ins overall), with spare strings, case and bow ...

An early 20th Century B.G. `British Manufacture` stained wood cased internal telephone, 10ins x 6.5ins x 6ins, with Bakelite and metal receiver an...

A late 19th/early 20th Century Thornton-Pickard "Ruby" mahogany folding plate camera, Reg. No. 406076, with lacquered brass mounts, 8.5ins x 8ins ...

A Eumig C3 cine camera No. 255542, with brown leather case (circa 1954-59) ...[more]

An early 19th Century English brass and mahogany three drawer telescope by Charles Sirrerrad of 34 Aldgate, London, 34ins overall (engraved with m...

A 19th Century Negretti & Zambra five drawer brass telescope, 36.25ins ...[more]

A late 19th Century R & J Beck lacquered brass and black enamel microscope, No. 11589, 11ins high, with single objective .25ins x 30ins, circa 188...

An early 20th Century black lacquer and brass Watson Universal high power binocular microscope, No. 55850, 16ins high, with two pairs of eye piece...

An early 20th Century Watson Service microscope, No. 26506, 12ins high, with two eye pieces and two objectives, in mahogany fitted case ...[more]

A mid 20th Century Watson black lacquer and brass metallurgical microscope, No. 80163 (circa 1944), 12.5ins high, with two eye pieces and two obje...

A mid 20th Century Watson Service microscope, No. 98800 with black lacquer, brass and steel finish, 13.75ins high, the mechanical stage with X and...

A Baker metallurgical microscope, 16ins high, with Schiko 240/12V light control, two eye pieces and three objectives, in fitted mahogany case ......

A Vickers M14/2 microscope, manufactured at Cooke Troughton & Simms Factory, York (circa 1969), 13.5ins high, with two eye pieces and three object...

A C. Reichert (Vienna) microscope, No. 60338, with circular stage, 12ins high, with one eye piece and one objective, in hardwood fitted case ...[...

An E. Leitz binocular microscope, No. 384049, 13ins high, with Swift adjustable under stage light system, three pairs of eye pieces and four objec...

An E. Leitz microscope, No. 191411, 12ins high, with separate light box of three objectives and with four eye pieces, in stained wooden case ......

An early 20th Century Winkel-Zeiss, Gottingen black lacquered microscope, No. 71352, 12ins high, with two eye pieces, three objectives, and circul...

A Carl Zeiss binocular photo microscope with five objective turret, 23ins high, one pair of eye pieces and four objectives, with its own light sou...

A Vickers M12 microscope made at Cooke Troughton & Simms Factory, York, 16.5ins high, with built in illuminator, binocular body and instruction ma...

A Prior black lacquered binocular low power microscope No. 12272, 14.5ins high ...[more]

A late Victorian collection of microscope slides in fitted pine box with separate trays, 8.25ins x 4.25ins x 3.25ins high (total 63), and a mahoga...

Jabez Hogg - "The Microscope, It`s History, Construction and Application", George Routledge & Sons (one volume), and a selection of other books on...

A Fowlers Bakelite and plated circular "Universal" calculator, 3.5ins diameter, and leather case for same ...[more]

A British First World War brass cased compass with sighting piece and cover, 2.25ins diameter (dated 1917, No. 195732 and with War Department arro...

A set of Victorian brass and cast iron balance scales stamped "Birmingham" and with "VR" cipher (the pan marked "Newcastle") 33ins high, and twen...

A Victorian mahogany collector`s cabinet, fitted one hundred sliding trays, with numbered turned ivory button handles (No. 69 missing), enclosed b...

A Victorian leather shot flask with embossed decoration of hunting dog to both sides, 8.25ins (2 1/2 lbs), and a Victorian copper powder flask wit...

A German first model (post 1938) Luftwaffe dagger by Alcoso of Solingen, with 12ins polished steel blade, with wire ground leather grip and circul...

An early World War II German SD dagger by Carl Wusthof of Solingen, with 8.75ins blade etched with "Alles Fur Deutschland", with wooden hilt beari...

A Congolese Cuba trade dagger with 17.5ins blade and carved wooden grip, 22.5ins overall, and two others similar ...[more]

A 20th Century Scottish Regimental hunting dirk of The Highland Light Infantry the 10.75ins blade with carved wood grip and pommel set with cairn...

A German dress sword by W.K.C. of Solingen in the Imperial Officers style with 27.5ins plated blade, shaped guard and lions head gilt pommel and r...

A German Fire Officers dress sword with 31.5ins blade etched with foliate work and trophies and stamped with No. 1492, with shagreen wire bound gr...

An 1887 Prussian Artillery NCO sabre, the 29.25ins blade marked with a crown over a W7, the hilt marked 25.A.6, with D-shaped guard and composite ...

A 19th Century German Artillery short sword, the 19ins steel blade bearing maker`s mark "R.D.L.", the brass hilt stamped crown over D and 100.LI 3...

A 19th Century British Artillery short sword with 19.25ins blade, the brass hilt with lions head pommel marked "BR17", as well as brass mounted le...

A late 19th/early 20th Century South East Asian sword, the 20.5ins blade and silvery metal mounts to the grip, and another with 16.5ins blade and ...

A 19th/20th Century Tibetan short sword with 21.5ins steel blade, brass hilt, leather bound grip and leather scabbard, 28ins overall ...[more]

A Japanese civilian Katana with Karakusa inlay to iron tsuba, the 25.75ins (654mm) blade with interesting hamon, in lacquered scabbard, 25.5ins (9...

A 19th Century Japanese Katana, the 25.75ins (654mm) blade (polished) with signed Tang, with iron tsuba and reptile skin covered saya (repainted f...

A World War II Japanese Officer`s Shin Gunto sword with 26ins (660mm) steel blade, cast bronze tsuba and fittings with steel saya, 40ins (1016mm) ...

A World War II Japanese Officers Shin Gunto sword with good quality 24.5ins (622mm) blade bearing signature and armoury marks, fitted with unusual...