Auction of Antique and Modern Woodworking Tools

Four unused STANLEY bevel edge chisels with composite handles 1/4" to 1" F ...[more]

A USA STANLEY Bedrock No 605 1/2C with flat sides and corrugated sole, some light pitting G ...[more]

An English STANLEY No 4C with corrugated sole G+ ...[more]

A mortice lock chisel, 3 mortice chisels and another all with boxwood handles G++ ...[more]

A d/t steel SPIERS No 7 coffin smoother with slight crack to handle G+ ...[more]

A steel soled brass shoulder plane by JOHN MOSELEY with mahogany infill and wedge G ...[more]

A beech plough by VARVILL and a moving fillester by MATHIESON G++ ...[more]

A NORRIS A71 beech razee style plane 12 3/4" x 3" with replaced handle and iron G ...[more]

Quantity of old screwdrivers etc G ...[more]

A box of tools G+ ...[more]

Four sets of rusty plough irons for restoration G- ...[more]

Five combination planes for spares and repairs G- ...[more]

Eight books G- ...[more]

RECORD Nos 05, 06 and 07 jointer some light pitting G ...[more]

RECORD Nos 04 1/2 x 2, 04 and 05 1/2 some light rust G ...[more]

40 old chisels and gouges G ...[more]

Eight mortice and marking gauges G ...[more]

A bowl adze with 6" edge and makers mark G++ ...[more]

Quantity of kitchen and household tools G ...[more]

Quantity of taps, dies reamers etc G ...[more]

A small claw hammer by TIMMINS and two others G+ ...[more]

Eight squares, bevels etc G ...[more]

Seven axes, billhooks etc G+ ...[more]

13 beech and boxwood spokeshaves G ...[more]

Six brass topped rosewood levels 6" to 10" G ...[more]

Eight ebony and brass bevels G ...[more]

Ten ebony and brass squares G ...[more]

Eight rosewood and brass squares some light rust G ...[more]

48 moulding planes G+ ...[more]

Six moulders with unusual boxing, one replaced wedge G ...[more]

Five dado planes with brass depth stops, one replaced wedge G ...[more]

A rare MATHIESON No 17 combination sash and side fillester with double d/t sole and depth stops G ...[more]

Two unused screwboxes 1" and 1 1/2" in orig boxes, made in Taiwan N ...[more]

19 turning tools G+ ...[more]

A well used 15 1/2" d/t steel panel plane by PRESTON for refurb. G ...[more]

A rosewood toolpad with tools in handle and a hand vice G ...[more]

A RECORD No 148 dowelling jig with various collets and a WODEN No X190 dowelling jig G+ ...[more]

A WODEN dowelling jig in orig box and a STANLEY No 59 G+ ...[more]

Ten beech handled pad saws G+ ...[more]

English STANLEY Nos 4 and 4 1/2 G+ ...[more]

English STANLEY Nos 50 and 78 both in orig boxes G+ ...[more]

Two STANLEY No 80 scrapers and four steel shaves, well used G ...[more]

Four pairs of trammels and a 15" level G ...[more]

A d/t steel rebate plane 9" x 1 1/4" with rosewood infill and wedge, wide mouth G ...[more]

A SIEGLEY combination plane marked No 2 on fence with cutters, one screw missing G ...[more]

Two corner braces and two others G ...[more]

Five part combination planes by STANLEY and RECORD G- ...[more]

Three planes for restoration G- ...[more]

Quantity of large screws inc 3" x 24 and 5" x 28 G ...[more]

Quantity of locks and keys G ...[more]

A large quantity of router bits and cutters G ...[more]

Quantity of old square nails G ...[more]

Three rosewood and ebony squares and 3 bevels G+ ...[more]

A 3" steel tipped brass plumb bob by PRESTON and another G+ ...[more]

18 chisels and carving tools G+ ...[more]

Six tools G+ ...[more]

26 turning tools G+ ...[more]

A gentleman's 11" double edge billhook by BRADES with ebony handle G ...[more]

Sailmaker's tools ie. 17" lignum fid and another in boxwood, needle case with needles, palm, pricker and a blackwood seam rubber G+ ...[more]

A nicely turned lignum carver's mallet G+ ...[more]